产品特点

   湿砂型脱模剂适用于铸造湿砂造型线机器造型及手工造型方法。主要用于湿砂造型的脱膜(离型)是以水为分散介质，不含任何有毒有害物质，提高模具与型砂之间的隔离性。本产品分散性好，易喷涂，使用方便，脱模力小；耐气候性好，存储性能稳定；对模具表面无腐蚀，无结垢现象，便于清洗

性能特点    

   1．脱模性能优越。

   2．在一般条件下，一次涂抹后，连续数次造型有效。

   3．具有防锈功能，可延长模型使用寿命。

   4，操作安全、无毒，系非危险品。

   5，均匀光滑，成膜性好。

产品型号

   XF-001 XF-002

◆注意事项

1．注意喷涂脱模剂的角度，喷涂量。夏季防止阳光直射，冬季注意防冻。

2．初期使用，好是每次都喷涂，待模型发亮以后，可隔1—2次喷涂1次，若相隔次数太多，会对以后的造型不利：

3．若不慎沾上皮肤或误入眼内时，应立即用清水冲洗干净。

Characteristics：

  The wet sand mold release agent is suitable for the moulding and the manual moulding method of the casting wet sand moulding line．Mainly used in the wet sand model of the film(off)，is the water

as a dispersed medium，does not contain any toxic and harmful substances，improve the separation between mold and molding sand．This product has good dispersibility，easy spraying，easy to use， good resistance to climatef stable storage performance|no corrosion on the mold surface|no scaling phenomenon，easy to clean．

Performance features：

  1．Excellent demoulding performance

  2．GenerallY conditions，after one smear，the continuous number of times the shape is effective

  3．It can prolong the service life of the model with antirust function

  4．Safe to operate，non—toxic，is not dangerous goods

  5．Uniform smooth，good f．1m forminq

  Product model：XF．．001 XF．．002

  Attention matters：

    1．Pay attention to spraying release agent angle，spraying quantity．Summer to prevent direct sunlight．Winter attention antifreeze

    2．Initial use，preferably every time spraying，after the model is shiny，you can spray 1 times after 1—2 times，if too many times apart，w…be unfavorable to the shape later

    3．If the skin is accidentally stained or mistakenly in the eye，rinse clean with water immediately